11 March 2016 - Forum Rules
Started by SMB2J-2Q, September 27, 2022, 03:15:31 AM
Quote from: KingMike on September 28, 2022, 09:30:29 AMAre you sure you're talking about a ROM address or a RAM address?The NES only has 2KB of RAM, so it only goes from $0 to 07FF, and then loops, so $089F is the same as $009F.
QuoteAnything using $0800-0FFF, $1000-17FF, and $1800-1FFF will equal to $0000-$07FF, As they are mirrored in the NES's internal RAM... Therefore $089F equals $009F, or simply $9F in zero page, which equals to both ''SprObject_Y_Speed'' and ''Player_Y_Speed'' in the original disassemblies.
QuoteRight, for RAM. When I said $E4 earlier as the address created for this fix on the SNES, I meant $7E00E4. I forgot that Geiger's debugger gives the ROM, RAM, SRAM etc. in hex mode, too. Anyway, my fix does not do the same thing as on the SNES, which bases its fix on horizontal acceleration while I make use of vertical. Because $06FF was the closest one that I originally had but that didn't quite fix this. So if anyone borrows my fix, credit me and replace the $06FF from earlier with $089F, and change the BEQ to BMI; everything else is the same to correct this glitch with invisible blocks. --ShaneM
Page created in 0.057 seconds with 19 queries.