[FUTURA]

Ok so the idea is I have an image (BMP file 320x224) that I want to set as a Mega Drive BIN file, so that I may use it with the "addintrogen" program here:

https://www.romhacking.net/utilities/1046/

It says to edit the "Default_logo.bin" file with any graphic editing software. However there is no tutorial on how to do this (or recommended editor even) and I just want to be able to import my BMP file into the rom and save it for the updated "Default_logo.bin which would then have the image I added, so then I can use that new modified Default_logo.bin as an intro to a Mega Drive rom using the "addintrogen" program.

Does anyone have a guide on how to do this, or alternatively knows a different and/or easier method?

[eskayelle]

It's been maybe a year since I've used it, but IIRC you open the Default_logo.bin in Tile Layer Pro, TileMolester, or the image editing software of your choice, make sure the proper graphic codec (bpp) is set to match what the Genesis reads (the default image will then become clearly evident), and then paste in your .bmp over the default image.  Then save.

[FUTURA]

It's been maybe a year since I've used it, but IIRC you open the Default_logo.bin in Tile Layer Pro, TileMolester, or the image editing software of your choice, make sure the proper graphic codec (bpp) is set to match what the Genesis reads (the default image will then become clearly evident), and then paste in your .bmp over the default image.  Then save.

Thanks. Based off of this I spent a lot of time trying to figure it out. After hours of trial and error I finally did it. I was able to create an intro screen at the start of a rom that is skipped by pressing START button.

That's a new skill under my belt.